| Liquid: | ||
| Pumped liquid: | Any Newtonian liquid | |
| Liquid temperature range: | 0 .. 35 °C | |
| Density: | 998.2 kg/m³ | |
| Technical: | ||
| Maximum particle size: | 10 mm | |
| Materials: | ||
| Pump housing: | Stainless steel | |
| DIN W.-Nr. 1.4301 | ||
| AISI 304 |
| Impeller: | Stainless steel | |
| DIN W.-Nr. 1.4031 | ||
| AISI 304 | ||
| Installation: | ||
| Pump outlet: | Rp 1 1/4 | |
| Maximum installation depth: | 2 m | |
| Electrical data: | ||
| Power input - P1: | 320 W | |
| Mains frequency: | 50 Hz | |
| Rated voltage: | 1 x 100 V | |
| Rated current: | 3.5 A | |
| Capacitor size - run: | 20 µF/250 V | |
| Enclosure class (IEC 34-5): | IP68 | |
| Insulation class (IEC 85): | F | |
| Length of cable: | 5 m | |
| Type of cable plug: | JP | |
| Others: | ||
| Net weight: | 6.5 kg | |
| Gross weight: | 6 kg | |
| Shipping volume: | 0.013 m³ |
Unilift KP 150 M 1
Submersible drainage pump
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase canned motor in insulation class F with thermal overload protection.
The pump is fitted with a suction strainer, a carrying handle and is supplied with a 5 m mains cable.
The impeller is a semi-open impeller for 10 mm free passage suitable for pumping groundwater, surface water, rain water and similar liquids.
The pump has a double shaft seal consisting of two lip seals with grease in-between.
The pump has an outer casing ensuring continuous cooling of the motor by the pumped liquid. The rotor shaft operates in two maintenance-free carbon bearings cooled by the pumped liquid
The motor is filled with a non-toxic motor liquid.
No review found.
Please Login to post review.
You May Also Like
