Unilift AP12.50.11.A1
Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection.
The pump is fitted with suction strainer and level switch for automatic start and stop.
The impeller is a SEMI OPEN impeller for 12 mm free passage suitable for pumping groundwater, surface water, rain water and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.
The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
| Liquid: | ||
| Pumped liquid: | Any Newtonian liquid | |
| Liquid temperature range: | 0 .. 55 °C | |
| Density: | 998.2 kg/m³ | |
| Technical: | ||
| Type of impeller: | SEMI OPEN | |
| Maximum particle size: | 12 mm | |
| Materials: | ||
| Pump housing: | Stainless steel | |
| DIN W.-Nr. 1.4301 |
| AISI 304 | ||
| Impeller: | Stainless steel | |
| DIN W.-Nr. 1.4301 | ||
| AISI 304 | ||
| Installation: | ||
| Pump outlet: | Rp 2 | |
| Maximum installation depth: | 7 m | |
| Electrical data: | ||
| Type of motor: | PSC | |
| Power input - P1: | 1.7 kW | |
| Mains frequency: | 50 Hz | |
| Rated voltage: | 1 x 230 V | |
| Rated current: | 8.5 A | |
| Cos phi - power factor: | 0.92 | |
| Rated speed: | 2760 rpm | |
| Capacitor size - run: | 20 µF/400 V | |
| Enclosure class (IEC 34-5): | IP68 | |
| Insulation class (IEC 85): | F | |
| Length of cable: | 10 m | |
| Type of cable plug: | NONE | |
| Others: | ||
| Net weight: | 15.5 kg | |
| Gross weight: | 16 kg |
No review found.
Please Login to post review.
You May Also Like
